PDA

View Full Version : Series III clutch refit



scatterling
01-24-2008, 07:25 PM
This might be a stupid question but I must ask....

The Green Bible states "Smear the splines of the primary pinion, the clutch centre and the withdrawl unit abutment faces with Molybdenum disulphide grease...."

- I get the splines and clutch centre, but what are the "withdrawl unit abutment faces" ?

Please advise!! Standing in garage - grease in hand :D

rvrsrvc
01-24-2008, 09:58 PM
How about the release bearing pivot?

scatterling
01-26-2008, 11:01 AM
turns out.....after talking to Les at RN that the abutment faces refer to the surfaces between the primary pinion cover "sleeve" and the release bearing housing.

Stupid english language!!! :mad:

....pain in my abutment! :D