PDA

View Full Version : 2X NRC7578 or ANR3646 steel wheels



galen211
11-03-2013, 08:56 PM
Looking for qty. 2 NRC7578 or ANR3646 16" steel wheels. Black would be nice, but I will take anything. RURR to ROTR would be greatly appreciated.

Thanks,
Galen

siiirhd88
11-05-2013, 06:56 AM
Galen,

I found one extra NRC7578 wheel with an old tire still mounted, and I will check some other rims for numbers this afternoon. I'll post tonight with what I find.

Bob

galen211
11-05-2013, 08:59 AM
Thanks Bob!

siiirhd88
11-05-2013, 07:53 PM
Galen,

I have only one NRC7578, which is supposedly the riveted "Late type outset 5.5" LWB". I show the #ANR3646, #569690, and #568966 the same width and offset. I have several #272309 "Early type inset 5.5" LWB" which have the rim offset more towards the center of the truck. I can try to get the wheel and tire to Randy, if he is going to ROTR.

Bob

galen211
11-06-2013, 08:54 AM
Galen,

I have only one NRC7578, which is supposedly the riveted "Late type outset 5.5" LWB". I show the #ANR3646, #569690, and #568966 the same width and offset. I have several #272309 "Early type inset 5.5" LWB" which have the rim offset more towards the center of the truck. I can try to get the wheel and tire to Randy, if he is going to ROTR.

Bob

How many of the 272309's do you have? I have one of those in my spare pile too.

The situation is that I have 4 steel wheels on my Disco at the moment. The rear 2 are NRC7578's and the front too are p/n 231601, 88" rims that are 5" wide. I am looking to make a matching set and prefer the 5.5" wide rims. Offset doesn't really matter, but a matched set does.

Depending upon timing I might be able to swing down and get them and roll back up to Trevor's for mounting. That is if Trevor is available!

siiirhd88
11-06-2013, 08:52 PM
Hi Galen,

I'm sure I have three or four 272309, but I didn't count..... I'll have to check tomorrow evening. Have you tried gathering a set of D1 spare steel wheels? I accumulated mine from various sources and still find them once and a while. I think they are 7" wide. I have a set of 6.5" 1 ton rims, but I plan on using them on my 109 or 88.

I can run them over to Trevor's if needed.

Bob



How many of the 272309's do you have? I have one of those in my spare pile too.

The situation is that I have 4 steel wheels on my Disco at the moment. The rear 2 are NRC7578's and the front too are p/n 231601, 88" rims that are 5" wide. I am looking to make a matching set and prefer the 5.5" wide rims. Offset doesn't really matter, but a matched set does.

Depending upon timing I might be able to swing down and get them and roll back up to Trevor's for mounting. That is if Trevor is available!

galen211
11-07-2013, 10:27 AM
Neil got back to me and it looks like he has 2 matching wheels for me.

It's a preference thing, but I really like the Series wheels on the Disco. I have never cared for the Disco spare wheels as a set. I also still have my alloys, but really wanted to stay with the Series wheels.

Thanks for looking,
Galen