siiirhd88
11-07-2017, 10:07 PM
I decided not to rebuild my rolled SIII 88 since the 109s do everything we need. I will have a bunch of parts available and figured I would see if there is any interest. I've already sold the galvy chassis. Parts are in York County, Pa.
Rover V8 into a Series conversion from Jake Wright including the bellhousing adapter, flywheel and special pilot bearing, engine mount brackets and oil filter housing. I also have the fabbed exhaust 'Y' pipe, Edelbrock 4V intake manifold and a Mallory Unilite distributor for a 3.9.
New set of galvy Pangolin Rock Sliders.
Two stock front bumpers, one galvy, one painted.
Standard hardtop.
Warn 8274 winch.
I have some various body parts including a couple of bonnets, a galvanized SIIA headlight rad panel, and possibly a lift up 'cat flap' for a hardtop.
Bob
Rover V8 into a Series conversion from Jake Wright including the bellhousing adapter, flywheel and special pilot bearing, engine mount brackets and oil filter housing. I also have the fabbed exhaust 'Y' pipe, Edelbrock 4V intake manifold and a Mallory Unilite distributor for a 3.9.
New set of galvy Pangolin Rock Sliders.
Two stock front bumpers, one galvy, one painted.
Standard hardtop.
Warn 8274 winch.
I have some various body parts including a couple of bonnets, a galvanized SIIA headlight rad panel, and possibly a lift up 'cat flap' for a hardtop.
Bob