galen211
08-24-2006, 03:24 PM
I am in the process of putting a new dash in as the PO "created" one himself. Anyway I have the heater control that goes along the side of the dash but I am not sure which control goes to which switch. One switch has 2 detents and the other appears to have 3, but this may not be correct.
What I can't figure out is would the vent opening only have two positions or the hot/cold control. In my mind they would both be able to stop anywhere in between. Maybe it doesn't matter which one I use each control.
I assume the inside switch has the same function on LHD vs. RHD and same for the outer switch since they are a mirrored part.
thanks,
Galen
__________________
What I can't figure out is would the vent opening only have two positions or the hot/cold control. In my mind they would both be able to stop anywhere in between. Maybe it doesn't matter which one I use each control.
I assume the inside switch has the same function on LHD vs. RHD and same for the outer switch since they are a mirrored part.
thanks,
Galen
__________________