View Full Version : Steering Relay Rebuild
crazyfish
01-21-2007, 04:22 PM
Anyone in the Doylestown area need some $ to open/check/rebuild my steering relay? It's jammed again and I do NOT want to miss SCC in the 109. I have no idea what I'm doing in there, and honestly I don't really have time to go digging too deep myself before SCC ( and I'm an idiot )- and of course, the weather just turned below freezing for the first time this year.
solihull109
01-21-2007, 08:14 PM
Sean, I can't make it down tomorrow, BUT I'm planniing for Thursday, I can take a look at it then if you like:)
crazyfish
01-21-2007, 09:21 PM
Do you mountain boys know such things? lol
I'd really appreciate it. See you on thursday.
solihull109
01-21-2007, 09:55 PM
Hey now, I'm originally from Montgomery County, just moved here 6.5 years ago......so I'm not all that "mountain" yet, but I'm a fixin to be learned.
crazyfish
01-21-2007, 09:57 PM
ohhhhhhhhhhhhh so you WERE a flatlander lol
Have you checked or added any lub/fluid to the relay since the last time I did it ? .. Try Marvel Mystry oil to free it . remove the bolt that goes throught the bellcrank , mark the bellcrank ( so you put it back in the same position) then remove the small bolt that is under where the bell crank was. Use a punp type oil can to push the marval in . You may find if you also remove the small bolt on the otherside it will give the air a place to escape . DO NOT remove all four of the small bolts at the same time as the relay is spring loaded
crazyfish
01-21-2007, 10:44 PM
I haven't added any, and it's leaking ( go figure! ) Funny thing is last time I did remove all those bolts and it didn't pop.
Last time I looked at it it was full of water .. I'll bet that why its acting up now . Leather bushings are frozen .. No school tomorrow do you want to bring it up?
crazyfish
01-21-2007, 10:50 PM
Would love to, but it's rather tough when it won't steer......
solihull109
01-22-2007, 10:38 AM
It won't turn at all?, or it's just way to tight(friction) like you need to put your foot on the bulkhead to get leverage? Want to convert to power streeing?
Powered by vBulletin® Version 4.1.9 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.