PDA

View Full Version : Heater Fuse



sven
04-12-2007, 08:21 AM
Ok, I've had this 73 S3 for about 2 weeks now and I got just about all the electronics sorted out. The only thing left is the heater fan. According to the diagrams there's an inline fuse somewhere for the power going to the fan switch. Anyone know where that fuse is?

Willard
04-12-2007, 08:41 AM
Have you tried to trace it? The wiring in the Series is not the most complicated thing on earth.
Also do not always go off the diagram, the PO may have hacked and chopped the wiring in your rover. Your best bet if to try and trace it from the switch to the Heater motor.


I know mine is hacked up a bit, but then what do you expect from the military.

galen211
04-12-2007, 08:55 AM
Did you drop your lower dash? Mine had quite a few inline fuses under the dash but I can't tell you if they were meant to be there or added after the fact.

sven
04-12-2007, 09:05 AM
The power for the heater switch goes into the harness (where it is all taped together into a bundle) so I cant see where it goes thereafter. I'll drop the lower dash 2nite.