PDA

View Full Version : Windscreen Frame



Tom109
12-04-2007, 12:51 PM
Looking for a good, usable II/IIa frame for the two-wiper motor set-up. Something clean, straight an hopefully rust-free.

Tom P.

crazyfish
12-04-2007, 05:01 PM
Tom,
Mine is straight, but just starting to come through the zinc. I have a new one waiting for install....

siiirhd88
12-04-2007, 05:40 PM
I've got a crusty looking solid one still on the parts 109. It has been painted (likely due to poor galvy) and the paint is peeling badly. I have a second one that the galvy is worn off on the right front upright and at a spot at the top left. Those spots are starting to surface rust.

Bob

jason
12-04-2007, 09:33 PM
Looking for a good, usable II/IIa frame for the two-wiper motor set-up. Something clean, straight an hopefully rust-free.

Tom P.

I've got one that's pretty close to half-way decent. If you remember where my house is, feel free to come by and look at it.

Tom109
12-28-2007, 02:47 PM
Sean & Jason,

Are either of your frames ready for paint + install?

Lemme know your schedule for teh next week and I can come take-a-look / pick-one-of-them-up.

Tom

crazyfish
12-28-2007, 04:47 PM
Mine's still attached to the Short Bus. - and I'm not telling you where the new one is :)

jason
12-29-2007, 09:56 AM
Mine's in the backyard leaning against a fence. Fresh off the parts truck. No guarantee's, no warranties, no refund's, no returns. Of course no charge, either. ;)

Tom109
12-29-2007, 10:03 AM
I'd say a collectors set of six-bottles would be in order - any preference?

Tom