1999 Disco II / Bosch Engine & No ACE
I already had new, stock rear springs from my air bag conversion so I put new stock springs from Atlantic British in the front. Todd from Toddco Suspensions Inc & AB told me not to do a 2" or greater lift because of vibration and other problems so I went with the 1.5". I drive the truck long distances ( West VA and the Pine Barrens ) so I wanted it to still have good on-road handling.
The new springs helped a lot with lifting up the front end because my old one were worn and comressed about 1.5 inches. If I can run 265/75/16's then my total lift will be 2.5" which is enough for the type of roading I do. I have a lathe at home so I can make .25" add on spacers if nessesary.