Thanks, here are some more!
Interior, getting there!
City lights in H4's to run with parklamps, done!
Led marker lites through taillight lens', took a while but done!
Frnt axle, waiting on taller springs!
Thanks, here are some more!
Interior, getting there!
City lights in H4's to run with parklamps, done!
Led marker lites through taillight lens', took a while but done!
Frnt axle, waiting on taller springs!
That paint looks so nice! Did you do an LT230 conversion or just have a shift knob?
'89 Range Rover
'95 D90
Last summer the viscous coupling locked up, so Randy had a LT230 in a DI so it was swapped out the Borg Warner....no more viscous coupling! Good eye BTW, I did have an aluminum shift knob on there, but it wasn't fitting right!
I'm afraid the paint is to nice.....considering it might spend a little time scraping up against things! Thank you though!
There is a lot of orange-peel, that you can't see in the pictures!
Everybody is telling me I should have sprayed it in matt-black!
Last edited by grnthng; 10-04-2012 at 12:22 PM.
Found some time to start hanging some suspension parts on it, while I wait for some Terrafirma stuff! I am on an increasing, or I should decreasing budget here...so I decided to re-use my OME springs and I will be using a spacer up front for the increased wheight of the ARB bmpr.
I hung my RTE front radius arms with the blue bushes...still have to order some shocks and its becoming very hard to choose! I'm still researching...and I am leaning towards the new Bilsteins 5100 monotube off-road shock!
Almost there though!
Wow! Looking really good!
'89 Range Rover
'95 D90
Thanks, Frank!
Took this pic with the original alloy and my original spare....still can't decide wether to use the steels I resprayed or go with the alloy and respray the black center in silver also!
Amazing how skinny those original Michelins were! I'd like to find 3 more that are virgin like mine just for the hell of it!
The LWB looks great!
I'd go with the RR alloy wheels, they just look right. You could sell the disco steelies on to a Series owner...
Tom P.
Tom Proctor
1965 exMod 109
1995 RRC LWB w/EAS
Thanks, Tom...I'm sorry I didn't respond sooner I was locked out for a while due a change in email address and hence I could not reset my password!
Anyway, I decided to just keep the series wheels... after test fitting a wheel, I thought it looked pretty sharp with the black rim!
I have been finishing up all the bits on it, so I will just post the rest of my pics!
Ordered a roll of the headliner material.....almost messed it up, but it looks somewhat acceptable!
Roll of extra wide material cost $125. inc. ship!
Here's all I needed to finish-up the suspension!