+ Reply to Thread
Results 1 to 2 of 2

Thread: 88 bits and pieces

  1. #1
    Join Date
    Mar 2007
    Location
    Airville, Pa.
    Posts
    248

    Default 88 bits and pieces

    I decided not to rebuild my rolled SIII 88 since the 109s do everything we need. I will have a bunch of parts available and figured I would see if there is any interest. I've already sold the galvy chassis. Parts are in York County, Pa.

    Rover V8 into a Series conversion from Jake Wright including the bellhousing adapter, flywheel and special pilot bearing, engine mount brackets and oil filter housing. I also have the fabbed exhaust 'Y' pipe, Edelbrock 4V intake manifold and a Mallory Unilite distributor for a 3.9.

    New set of galvy Pangolin Rock Sliders.

    Two stock front bumpers, one galvy, one painted.

    Standard hardtop.

    Warn 8274 winch.

    I have some various body parts including a couple of bonnets, a galvanized SIIA headlight rad panel, and possibly a lift up 'cat flap' for a hardtop.

    Bob

  2. #2
    Join Date
    Jan 2007
    Location
    West Chester, PA
    Posts
    586

    Default 88" parts

    PM sent
    '92 Range Rover
    '51 80"

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts